How to Troubleshoot Printer not Found during Network Driver set up errors?

The HP driver on the software CD or downloaded from HP official website enables to use a fully guided installer to set up your printer for a wired or Wi-Fi network connection. If the installer is unable to identify the printer after choosing the connection type, one of the following issues might show:-
·         Printer not found
·         Not capable to find the printer
·         No devices found
·         Your printer could not be found on your wireless network

HP printer tech support

Method 1:- Must restart the computer, printer & router:-
You need to restart the computer, printer, and router to solve any technical problems during the printer setup.
  1.       Unplug the power cable from the router.
  2.       Turn off the printer.
  3.     You need to close all running programs on your computer system including HP software installation window and shut down the computer system.
  4.       Reconnect the power cable to the router and wait for Internet activity light to show a normal connected status.
  5.       Turn on the printer.
  6.       Turn on the computer system.
  7.    Attempt to install HP driver and software again. If this method is not sufficient, you can take online technical guidance from online HP printer tech support team available round the clock.
Method 2:- Check correctly the network and printer connection status-
Confirm that your network is responding properly and that the printer is fully prepared for complete network setup.
1.       Make sure that the printer is fully prepared for the network setup.

·         Wireless network connection- Open settings menu or wireless network into the printing machine to confirm that wireless signal is turned on. Confirm that the light next to wireless Icon is either on or constant, or flashing.
·         Wired network connection- Check properly that the cord is plugged to the printer Ethernet port and to an easily available port on the router. The green link light must be ready and orange activity light must blink when the cord is connected.
2.       Confirm that your printing machine is not connected to a host network like those networks found in hotels, schools or home networks which permit guest logins.
3.       If you have a dual-band router, confirm that it is set to 2.4 GHz band. If your router is set the 5 GHz band, the printing device cannot connect to the network.
4.       On the computer system, mouse over the network button in the notification space to see the network name and status of the connection.

·         If the network displayed is not yours-you should reconnect to your own network to finish the printer set up.
·         If network signal strength is very weak- You should move the computer system and printer closer to the router.
·         If network status is not connected- Make sure that your network is working rightly, check carefully the status again. Confirm that a checkmark displays next to the network name.
·         If an Airplane icon shows, you need to click the Icon and slide the airplane mode slider to off, and then you need to connect to your wireless network.

5- Finally, you try to install the HP driver and software again. Still, if you are facing Printer not found during network driver set up errors, you should call at HP printer support number 1-855-461-5433 to get immediate technical support or help from experts.
Location: Rutherford, NJ, USA

Comments

Post a Comment

Popular posts from this blog

How to Fix a “Scanner Failure” Message Error when Copying, Scanning, or Faxing?

Image
When trying to scan, fax or copy, a scanner failure message displays. Not able to scan, copy or send a fax, it means that “scanner system failure” error displays. The error shows for scanner hardware or power problems like a scanner bar jam or calibration fault, low scanner bulb temperature or an internal or external electrical fault. It is not related to network or USB connection problems. Step 1:- You need to reset the printing machine and check the power source properly. You need to reset the printer to clear certain problem states by standardizing the scanner mechanism and check the power source to make sure that the printing device is obtaining adequate power to operate the scanner. You need to press the power button to turn on the printing machine if it is not already on. With the printing device turned on, unplug the power cable from the printer. Remove the power cable from the power source and then wait for thirty seconds. If you attached the power cable to multi
Read more

Troubleshooting Tips &Tricks for Common Errors of HP Scanner

Image
HP scanner is a common name among the users which assists them to scan different documents in the black and white or colored formats.  It is specially designed with the latest technology and excellent qualities, these scanning devices are very portable and can connect simply with various kinds of the systems through wireless and wired connectivity. However, if any error is obstructing your work, you should follow easy instructions given below:- Restart HP Scanner Device:- If your HP scanner is not working correctly, you should restart the scanning machine comprising all connected router, computer, scanner and other related devices. Often, HP scanner unable to build a connection with other devices to power-related errors may be it gets restored after the restart. If you have any technical trouble in this instruction, you can get online help from HP scanner technical support team immediately. Must Uninstall & Reinstall HP Scanner:- Possibly, the technical error m
Read more

Online Guidance is Available to Repair HP Scanner

Image
HP is one of the most renowned and successful manufacturing companies all over the world. It offers top quality desktop, laptop, smartphone and others to the users. Nowadays, there is a wide variety of the printer available in the market but HP is a well-known brand compared to others. It provides the printer scanner with latest features which permits you to print simply. Scanning with HP printer is not a real experience but also it provides the quality digital prints for scanning different kinds of documents. Often HP scanner will have few technical difficulties for customers due to some multi-functional technology. To fix your problems in your scanner, you should contact online HP scanner support team immediately. Here, we are explaining a few errors with right solutions given below:- Must Restart & Check Driver Settings:- You should restart your printer and scanner setting via the drive when you experience any issues while scanning your document. You should check th
Read more